Mafell milling motor FM 1650 NC-LO - 9M1801
Delivery unit: 1 piece
Safe shopping
Safe shopping
This online shop is PCI-DSS Level 1 certified – this is the highest security standard in payment transactions. This means that all payments (credit card, PayPal, etc.) are processed according to the same security standards as banks.
We also use 256-bit SSL encryption . This means that personal data, passwords and payment information are protected at all times.
Shipping & Delivery
Shipping & Delivery
Every order is carefully processed and checked. We ship orders from Monday to Friday.
We provide information about delivery times, countries and costs here .
Important NOTE
Important NOTE
The installation of spare parts, especially electronic components, may only be carried out by qualified personnel or after careful examination of the installation instructions.
Working on electrical systems poses considerable risks for people and equipment. Improper installation, faulty wiring or failure to comply with safety regulations can lead to electric shocks, short circuits, fires, personal injury or malfunctions.
Before installation, devices must be disconnected from the power supply and secured against being switched on again.
Please check before ordering whether the spare part is suitable for your device. We accept no liability for damage caused by improper installation or incorrect handling.
Spare parts cannot be exchanged if they have already been installed, tested or are no longer new.
Please note that no technical installation assistance or telephone support is offered for the spare parts.
Mafell milling motor FM 1650 NC-LO - 9M1801
Description
Description
With the FM 1650 PV-LO, MAFELL has developed another milling motor “Made in Germany”. The high quality standard and the well thought-out details make the MAFELL milling motor the best partner in its performance class.
- spindle lock
- External portal interface
- Made in Germany
- overload detector with LED status display
The speed can be continuously adjusted to suit any application, either manually or via the portal interface. The digital electronics are also equipped with soft start, constant speed under load, idle speed reduction and overload protection.
AREA OF OPERATION
- Model making, mold making, advertising technology, engraving, jewelry, electronics, stonemasonry
- Ideal for portal milling machines, cutting tables, grinding devices and flexible shafts, drive motor for saw and milling tables
- For wood, metal, plastics, foam, polystyrene, stone
ADVANTAGES
- Duo-In: The speed can be continuously adjusted to suit any application, either manually or via the portal interface. Additional LED status display.
- The fastening is possible via the clamping collar or alternatively via a direct screw connection to the portal.
- The MAFELL milling motors are manufactured under the strictest quality controls in Oberndorf a. N. Before delivery, each milling motor is "run in" in the test booth. This increases the service life and durability.
- Highest concentricity due to delicate coordination of all components and the fact that the armature and spindle are made from one piece and balanced.
- The spindle can be locked using the push button or using an open-end wrench on the flats of the spindle.
- The labyrinth seal permanently protects the spindle and bearings from the smallest particles, dust and chips.
SCOPE OF DELIVERY
- 1 collet OZ 12, 8 mm
- 1 open-end wrench
- 1 NC control cable M8 / 4-pin, 5 m
- 1 connection cable 4 m
TECHNICAL DATA
| nominal power | 1650 W |
| universal motor | 230 V / 50 Hz |
| nominal idle speed | 4,000 - 23,000 rpm |
| NC connection | M8 / 4-pin |
| power supply in NC mode | 8 - 56 V |
| External control | 0 - 10 V |
| portal fastening (drilling holes) | 6 x M6 |
| clamping neck | 43 mm |
| collet | 8 mm |
| Dimensions (L x W x H) | 346 x 98 x 86 mm |
| sound pressure level dB (A) | 85 |
| Weight | 3.22 kg |
Warranty & Guarantee
Warranty & Guarantee
As a consumer, you have a 24-month statutory warranty from the date of delivery.
Entrepreneurs have a 12-month statutory warranty.
Cutting tools, wearing parts and operating materials are excluded from the warranty because their service life depends on the respective use, storage and/or the intensity of use.
Warranty claims can only be made in the case of production errors or demonstrable defects.
Here you can get more information about what the warranty is: https://www.oesterreich.gv.at/themen/gesetze_und_recht/verbraucherschutz/Gewährleistung-und-Verbraucherschutz.html
Information about the manufacturer
Information about the manufacturer
Details on the General Product Safety Regulation (GPSR)
Manufacturer
dealers
Mikes Toolshop GmbH
Gewerbegebiet 6
5121 Ostermiething
Austria
mail@mikestoolshop.at
+43 6278 93080
PAYMENT & SECURE SHOPPING
OUR PAYMENT METHODS
We offer you a variety of established and trustworthy payment methods for your order. If you still need proof of trust, you can call us at any time via phone or WhatsApp.
MAFELL Complete
With Mafell's 3-year cost protection guarantee MAFELL-Complete, you enjoy comprehensive security against repair costs for a full 36 months.
The warranty covers all wear parts, including battery packs, ball bearings, sealing rings, switches, and brushes (excluding insert tools and consumables, as well as continuous industrial use). This saves you hassle, effort, and money if something goes wrong.
IMPORTANT: Register the machine immediately after purchase!
